VERBATIM · DIGIBAL ONLINE
Verbatim Sync & Charge 100W USB-C to USB-C Charging & Data Cable (31846)|120cm · PD 3.0 · Kevlar Reinforced
PD 3.0 up to 100W|QC 3.0|480Mbps data transfer|DuPont Kevlar reinforced fiber|50,000 bend test cycles
100W PD 3.0QC 3.0480MbpsKevlar Reinforced50,000 Bends
Product Overview
31846 is the entry-level 100W model in the Verbatim Sync & Charge series: 120cm long with a 3.8mm cable diameter, built-in E-Marker chip, support for PD 3.0 up to 100W and QC 3.0, and data transfer speeds of 480Mbps. Its purpose is clear—a daily-use cable that handles fast charging for most laptops and smartphones.
The specifications on this page are taken item by item from Verbatim Hong Kong's official product page (SCC2-CC100): USB-C (male) to USB-C interface, 120cm length, 3.8mm cable diameter, aluminum, nylon, TPE, and built-in Kevlar construction, data transfer speeds of up to 480Mbps, maximum output of 100W, support for PD 3.0 and QC 3.0, and a 2-year limited manufacturer's warranty.
Let's clarify a common misconception: 100W is the cable's maximum rating, not the actual charging power. The actual power is determined by the weakest link among the charger, device, and cable—if your charger only supports 65W, switching to a 100W cable will not make it deliver 100W. The cable's value lies in avoiding becoming a bottleneck, not in increasing power output.

Sync & Charge 100W Cable (Product Image)
Built-in E-Marker: A Requirement for 100W
For a USB-C cable to deliver 100W, it must include a built-in E-Marker chip to communicate to the charger that it supports 5A current. Without an E-Marker, even a cable with the same appearance will be limited to a maximum of 60W (3A). The official specifications clearly state that this cable includes a built-in E-Marker and supports up to 100W with PD 3.0.
Practical buying advice: when purchasing a 100W cable, this is the specification to look for. Many cables on the market are labeled 100W but actually only deliver up to 60W because they omit the E-Marker.
- Built-in E-Marker Chip
- Supports PD 3.0 up to 100W
- Cables Without an E-Marker Are Limited to 60W
DuPont Kevlar Reinforced Fiber and 50,000 Bend Test Cycles
The official specifications state that the cable uses DuPont Kevlar aramid reinforced fiber and has passed 50,000 bend test cycles. Both features address the same issue: breakage at the junction between the connector and cable body.
The part of a cable that most often fails is not the middle, but the base of the plug. Kevlar fiber provides tensile strength, while the reinforced flexible jacket helps resist bending. For people who plug and unplug their cable every day and carry it in a bag, this is more practical than an extra 20W.
- DuPont Kevlar Aramid Fiber
- 50,000 Bend Test Cycles
- Reinforced Jacket Helps Prevent Connector Breakage
480Mbps Data Transfer: Charging First, Sufficient for File Transfers
The official data transfer speed is up to 480Mbps (equivalent to USB 2.0 speeds). This is sufficient for phone backups, file synchronization, and photo exports, but not suitable for external SSDs or 4K video editing.
Buying tip: if your use includes external hard drives or video work, you should consider a 240W model with USB4/40Gbps (31849 is available in the same series); for charging and everyday file transfers, 480Mbps is more than sufficient.
- Up to 480Mbps
- Suitable for Backups, Synchronization, and Exports
- External SSDs Require a 40Gbps Model
120cm and 3.8mm: A Balance Between Length and Portability
The official length is 120cm, with a cable diameter of 3.8mm. 120cm is a practical length for running from a wall outlet to a desk—more flexible than 1m, yet not as difficult to store as a 2m cable.
The 3.8mm cable diameter is moderately slim, making it soft and easy to bend. The trade-off is that the internal copper wires are thinner, resulting in slightly more voltage drop over long distances at high power. For 100W use, 120cm is a reasonable compromise.
- Practical 120cm Length
- 3.8mm Cable Diameter, Soft and Easy to Bend
- High power and long distances require attention to voltage drop
PD 3.0 and QC 3.0 dual protocol support
Officially supports PD 3.0 and QC 3.0. PD is the standard protocol for USB-C, while QC 3.0 is commonly used by Qualcomm-powered devices. Both are supported on the same cable, meaning it can be used across Android and iPhone devices.
Note: Protocol support means the cable does not restrict compatibility; the actual handshake is determined by the charger and phone. iPhone uses PD, while Android devices use PD or QC depending on the model.
- PD 3.0 plus QC 3.0
- Compatible with iPhone and Android
- Handshake determined by the charger and device
2-year limited warranty and official Hong Kong stock
Officially listed with a 2-year limited warranty. Cables are consumable products, so the warranty period is part of the real value — a $68 cable with a 2-year warranty helps spread out the replacement cost.
This shop sells official Hong Kong stock. Warranty terms are subject to this product page and the distributor's terms; please contact us before placing an order if you need to confirm the warranty process.
- Original 2-year limited warranty
- Official Hong Kong stock
- Warranty process can be confirmed in advance
What's in the box
The following is the packaging content for official Hong Kong stock. Actual accessories may vary by shipment batch; please contact us before placing an order if you have any questions.
- The official page lists the cable itself as the packaging content. Actual packaging may vary by shipment batch. Please contact us before placing an order to confirm whether a cable tie or storage pouch is included.
- Official Hong Kong stock; warranty terms are subject to this product page and the distributor's terms. Please contact us before placing an order if you need to confirm the warranty period and coverage.
- Official Hong Kong stock with local support.
Suitable scenarios
['31846 Suitable for the following situations:']
- You already have a 65W or higher PD charger and need a cable that won't hold it back
- Plugged in and unplugged daily and carried in a bag, with cables often failing at the connector
- You use both iPhone and Android devices and want one cable for both
- You do not need high-speed data transfer for an external SSD
Why choose this model
- 100W PD 3.0 with built-in E-Marker
- QC 3.0 compatible with Qualcomm-powered devices
- 480Mbps is sufficient for everyday file transfers
- Kevlar fiber with a 50,000-bend test
- 120cm / 3.8mm, flexible and easy to store
- Original 2-year limited warranty
Full specifications
| Model | SCC2-CC100 (Item No. 31846) |
| Connector | USB-C (male) to USB-C |
| Length | 120cm |
| Cable diameter | 3.8mm |
| Materials | Aluminum, nylon, TPE, built-in Kevlar fiber |
| Maximum output | 100W |
| Charging standards | PD 3.0, QC 3.0 |
| Data transfer | Up to 480Mbps |
| Special design | Built-in E-Marker chip |
| Durability Test | 50,000 Bend Test Cycles |
| Country of Origin | Not listed on the official page |
| Warranty | 2-Year Limited Warranty |
| Source | verbatim.com.hk |
Comparison Within the Same Series
Specifications for three cables in the same series, sourced from Verbatim Hong Kong's official product pages; the model you are viewing is highlighted.
| Item | 31846 (This Page) | 31848 | 31849 |
| Maximum Power | 100W | 100W | 240W |
| Data Transfer | 480Mbps | 480Mbps | 40Gbps |
| LED Display | No | Yes | Yes |
| Cable Diameter | 3.8mm | 5.1mm | 5.1mm |
| Length | 120cm | 120cm | 120cm |
Frequently Asked Questions
Does a 100W cable always charge at 100W?
No. 100W is the cable's maximum rating; the actual power depends on the charger and device. If the charger only supports 65W, switching to this cable will still deliver 65W.
What's the difference between this and 31848?
31846 does not have an LED display and has a 3.8mm cable diameter; 31848 has an LED real-time power display and a 5.1mm cable diameter. Both support 100W, 480Mbps, and are 120cm long, and are sold at the same price in our store.
Can it be used with an external SSD?
Not recommended. This cable supports data transfer at 480Mbps. For external SSDs or video work, choose the USB4/40Gbps 240W model (31849).
Does it support fast charging for iPhone?
Yes. iPhone uses the PD protocol, and fast charging is supported when paired with a PD charger. The cable itself supports PD 3.0 up to 100W.
What materials is the cable made of?
The official specifications list aluminum, nylon, TPE, and built-in Kevlar fiber.
Why choose a cable with E-Marker?
USB-C requires E-Marker communication to support 5A/100W; cables without E-Marker are limited to 60W. This cable is officially specified as having a built-in E-Marker.
How long is the warranty?
The official listing states a 2-year limited warranty. This store sells genuine Hong Kong-market products; please contact us before placing your order for details about the warranty process.
How does the cable diameter affect performance?
3.8mm is softer and easier to store, with slightly higher voltage drop; 5.1mm has thicker internal copper wires, offering greater stability at high power over long distances. For 100W use at 120cm, both are suitable.
31846: The basic 100W model, with no compromises
Tell us which charger and device you use, and we’ll help confirm whether you need a 100W cable or whether 60W is sufficient.
Verbatim Local support