No magnetic ring on your case? Add one for an instantly secure magnetic hold.If your phone case does not have a MagSafe magnetic ring, pair it with
MOMAX Hoop Magnetic Ring Stand KH19 and stick it to the centre of the back of your phone case. Your magnetic power bank will lock firmly into place, and it can also be used as a finger-grip stand; alternatively, you can purchase a MagSafe-compatible magnetic case for the same effect.
No magnet ring in your case? Add one. Stick the
MOMAX Hoop Magnetic Ring Stand (KH19) onto the centre of your case to complete the magnetic circuit — your magnetic power bank then locks on firmly, and it doubles as a finger-grip stand. A MagSafe-compatible case works just as well.
Q: Before buying, how do I know whether my phone case works with magnetic charging?
A: Check your case first: a MagSafe case or a case with a magnetic ring on the back will snap on and hold firmly. Regular leather and hard cases without a magnetic ring only allow the magnets to grip weakly through the case, so they can slide off easily. Consider what type of case you are currently using before buying.
Q: Can I still charge if my case doesn't have a magnetic ring?
A: Yes. Connect the power bank to your phone with a USB-C cable and it will charge as usual (some models even include a built-in short USB-C cable; refer to the package contents). Magnetic attachment is simply a convenient way to charge by snapping it on—it is not the only charging method.
Q: If I want a stronger hold, should I add a magnetic ring or replace the case?
A: Either option works. Adding a magnetic ring is the most affordable and quickest solution; align it with the center of the phone's charging coil when applying it. Replacing the case with a MagSafe case is the most reliable option, as the magnetic force locks directly onto the phone. Consider whether you want to keep your current case before buying.
Q: Why does the power bank come off so easily after I attach it?
A: In most cases, this is because the case does not have a magnetic ring—the attachment is already loose, so a bump or putting it in a bag can make it slide off. This is a physical phenomenon, not a defect; adding a magnetic ring or switching to a magnetic case will solve the problem. Also note: the larger the capacity in this series, the heavier the unit (10000/20000mAh models are among the heaviest). Magnetic attachment is less effective when used with a thick leather case—use a thin case for a more secure hold, or charge directly with the built-in cable. Also note: the larger the capacity in this series, the heavier the unit (10000/20000mAh models are among the heaviest). Magnetic attachment is less effective when used with a thick leather case—use a thin case for a more secure hold, or charge directly with the built-in cable.
Q: Before buying, how do I know if my phone case works with magnetic charging?
A: Check your case first: a MagSafe case, or one with a magnet ring on the back, snaps on and locks firmly. Plain leather or hard cases without a ring let the magnets grip only weakly through the shell, so the pack slides off easily. Consider your case before buying.
Q: My case has no magnet ring - can I still charge?
A: Yes. Connect the power bank and your phone with a USB-C cable (some models include a built-in short USB-C cable - see the package list); magnetic attachment is just the snap-on convenience, not the only way to charge.
Q: To get a stronger hold, should I add a ring or change the case?
A: Both work: a magnetic ring is the quickest fix - centre it on the back of your phone; a MagSafe case is the most secure, locking directly onto the phone. Consider whether you want to keep your current case.
Q: Why does the power bank slide off so easily?
Most likely your case has no magnet ring - the connection sits loose from the moment it attaches and slides off at a touch or in a bag. That is physics, not a fault; a ring or a MagSafe case solves it. Note: in this series, higher capacity means a heavier body (the 10,000/20,000mAh models are the heaviest) - on a thick case the magnetic hold works harder; a slimmer case helps, or just charge with the built-in cable.
Q: Can't charge the power bank after unboxing, or does it not respond no matter how many times you press the button?
A: New units generally have some reserve charge, but long-distance transport may activate transport protection mode: first, press and hold the power button for about 5 seconds to wake it up; if there is still no response, use a certified charger to charge the power bank itself for 10–15 minutes to unlock it. Wait until the LED lights up before charging your device.
Q: Why does it stop charging my earbuds, smartwatch, or other small devices after a while?
A: The power bank automatically turns off to save power when it does not detect a sufficient current draw. Double-press the power button to enable trickle (low-current) mode before charging earbuds or a smartwatch. Double-press again after charging to return to normal mode.
Q: Why does charging stop intermittently, or why does the power bank feel slightly warm?
A: This is usually overheat protection: hot weather, direct sunlight, or using the device while charging can trigger it. Move it to a cool, shaded place and let it cool down before using it again. It could also be caused by poor cable contact, so try another certified cable. Overheat protection is a safety feature, not a fault.
Q: Why does it stop charging my phone at 80%?
A: This is your phone's own battery protection feature (Optimized Charging), not a problem with the power bank. Depending on your usage habits, the phone may pause charging at 80%; pick up and use the phone, or turn off Optimized Charging to continue.
Q: Why is there no response when I place my phone on the magnetic/wireless charging area?
A: After placing your phone, wait 2–3 seconds for sensing to start charging; then align it with the centre of the phone’s charging coil. A case that is too thick or made of metal may block sensing, so remove the case for the most accurate test.
Q: Why does the power bank itself charge very slowly or fail to reach full charge?
A: Use a sufficiently powerful charger and a certified cable (such as 20W or above PD) for faster charging. Also make sure you are using the port marked as input, as some ports are output only.
Q: The brand-new unit will not charge anything / the button does nothing?
A: New units ship with reserve charge but may enter shipping-protection mode after long transit: press and hold the power button for about 5 seconds to wake it; if still unresponsive, charge the power bank itself with a proper charger for 10-15 minutes to unlock - once the LED lights up, charge your device.
Q: Charging earbuds or a watch stops after a moment?
A: The bank auto-shuts when it detects a tiny current. Double-press the power button to switch to trickle (low-current) mode for earbuds and watches, then double-press back to normal mode afterwards.
Q: Charging starts and stops, or the body gets a little warm?
A: Usually the over-heat protection: hot weather, direct sun, or charging while using the device can trigger it - move to a cool spot and let it cool; it can also be a loose cable, try a certified cable. Over-heat protection is a safety feature, not a fault.
Q: Why does my phone stop at 80% when charging from the bank?
A: That is the phone's own battery optimisation, not the power bank - the phone pauses at 80% based on usage habits; take it off charge to continue, or turn off optimised charging.
Q: The magnetic / wireless pad shows no response with my phone on it?
A: Wait 2-3 seconds after placing the phone - sensing takes a moment; centre it on the charging coil; a very thick or metal case blocks sensing - test without the case.
Q: The power bank itself charges slowly or never reaches full?
A: Use a sufficiently powerful charger and a certified cable (e.g. 20W+ PD); also check you are using the port marked as input - some ports are output only.
Frequently Asked Questions
Q: How can I tell before buying whether my phone case supports magnetic attachment?
A: Check the case first: only a MagSafe magnetic case or a case with a magnetic ring on the back can attach securely at once. Ordinary leather cases and standard hard cases without a magnetic ring will only attach weakly through the case and may easily slide off. Consider what type of case you are using before buying.
Q: My case does not have a magnetic ring. Can I still charge?
A: Yes. Connect the power bank to your phone with a USB-C cable and it will charge as normal (some models also have a built-in short USB-C cable; refer to the package contents). Magnetic attachment is simply a convenient “attach and charge” feature, not the only charging method.
Q: Should I add a magnetic ring or replace the case for a more secure attachment?
A: Either option works: adding a magnetic ring is the most affordable and quickest solution; align it with the centre of the phone’s charging coil when attaching it. Replacing the case with a MagSafe magnetic case is the most secure option, as the magnetic force locks directly onto the phone. Consider whether you want to keep your current case before buying.
Q: Why does the power bank come off so easily after being attached?
A: This is usually because the case does not have a magnetic ring—the attachment is already weak, so it may slide off when bumped or placed in a bag. This is a physical effect, not a fault; adding a magnetic ring or replacing the case with a magnetic case will resolve it. Also note: within this series, larger-capacity models have heavier bodies (10000/20000mAh are among the heaviest). Magnetic attachment is less secure when used with a thick leather case—use a slim case for better stability, or charge directly with the built-in cable. Also note: within this series, larger-capacity models have heavier bodies (10000/20000mAh are among the heaviest). Magnetic attachment is less secure when used with a thick leather case—use a slim case for better stability, or charge directly with the built-in cable.
What does 「Battery capacity」 actually affect?
Capacity determines how many times it can charge your device; the stated figure is the cell capacity, while the actual output is slightly lower due to conversion losses.
What does 「Rated capacity」 actually affect?
Capacity determines how many times it can charge your device; the stated figure is the cell capacity, while the actual output is slightly lower due to conversion losses.
What does 「Battery cell capacity」 actually affect?
Capacity determines how many times it can charge your device; the stated figure is the cell capacity, while the actual output is slightly lower due to conversion losses.
What does 「USB-C1 / USB-C2 input」 actually affect?
The input specification determines the recharging speed; a PD-supported charger provides noticeably faster recharging.
How many devices can be charged at the same time?
Refer to the “Battery capacity” item: 20000mAh (77.4Wh).
Is this Hong Kong official stock?
Yes, this listing is Hong Kong official stock. Warranty coverage is subject to this product page and the distributor’s terms.
MOMAX 1-Power F.Pass⁺ 20000mAh Magnetic Power Bank with Built-in Cable (CCC Certified) IP159 [Hong Kong Official Stock]: Choose According to Your Device
Tell us which devices you will charge and how many you will use at the same time, and we will help confirm whether this model is sufficient for your needs.
MOMAX|Local Support