Cart

Your cart is currently empty.

Continue shopping

1 / 2

REOLINK Solar Panel 3 12W

$78.00 SGD
Quantity

Inventory: In stock (estimated shipping within one business day)

freight

Product maintenance terms and conditions

REOLINK · DIGIBAL Hong Kong Official Stock

Reolink Solar Panel 3 12W Solar Panel (ACCSP03W)|Type-C, 4 m Cable

12W|6.4V × 1.9A (Peak)|Type-C|310×204×3.6mm|4 m Cable

12WType-C4 m CableWhite310×204mm

Product Introduction

Solar Panel 3 (ACCSP03W) is Reolink's 12W solar panel, offering twice the power of the 6W Solar Panel 2 series. It is ideal for installation locations with frequent triggers or shorter sunlight hours.

The specifications on this page are sourced from the product information provided by **Hong Kong distributor BASCO**: 12W, Type-C, white, peak output of 6.4V × 1.9A, dimensions of 310×204×3.6mm, and a 4 m cable. Compatible with Reolink's entire range of outdoor wireless battery cameras.

Why choose 12W: The actual output of a solar panel is always lower than its rated output, as clouds, angle, and dust all reduce performance. Under ideal conditions, a 6W panel can roughly offset the daily power consumption of a typical battery-powered camera. If your location only receives sunlight in the morning, or the camera is triggered dozens of times a day, a 6W panel may not generate enough power, while 12W provides additional capacity.

Solar Panel 3 Appearance (Official Image)
Solar Panel 3 Appearance (Official Image)

Six Key Highlights

Power
12W
Connector
Type-C
Voltage
6.4V
Current
1.9A Peak
Dimensions
310×204mm
Cable Length
4 m

The Practical Difference Between 12W and 6W

Twice the power means approximately twice the amount of energy can be replenished under the same sunlight conditions. For locations with frequent triggers, such as corridors with passing pedestrians or driveways with constant traffic, this difference determines whether the system can remain self-sufficient over the long term.

How to decide: First, check the camera's battery capacity and the number of daily triggers. For a typical 4G battery camera triggered 20-30 times per day, 6W can barely maintain a balance under sufficient sunlight. If there are more than 40 triggers or less than 3 hours of sunlight, choose 12W.

  • Twice the power of the 6W version
  • Ideal for locations with frequent triggers
  • 12W recommended when sunlight is less than 3 hours

6.4V × 1.9A and Type-C

The official rated peak output is 6.4V × 1.9A ≈ 12W. The Type-C connector plugs directly into the camera with no adapter required. It offers plug-and-play compatibility with Reolink battery cameras that use Type-C connectors.

If your camera is an older model with a micro-USB connector, check compatibility first — an incompatible voltage or protocol may prevent charging or result in very slow charging.

  • 6.4V × 1.9A Peak
  • Direct Type-C connection with no adapter
  • Check compatibility for older micro-USB models

310×204mm Installation Area

The panel measures 310×204mm and is larger than the 6W version, so installation requires a relatively flat surface. If space is limited, such as on a narrow railing or windowsill, measure the area before purchasing.

A tilt angle of 20-30 degrees is recommended for Hong Kong's latitude, with due south being the optimal direction. When securing the panel, use the bracket to fasten it to a solid structure. Add waterproof pads to metal surfaces to prevent rust stains.

  • Requires a relatively flat installation surface
  • Recommended tilt: 20-30 degrees facing south
  • Measure the space before purchasing
Rear Bracket and Mounting Structure|Image source: Hong Kong distributor BASCO
Rear Bracket and Mounting Structure|Image source: Hong Kong distributor BASCO

4 m Cable for Flexible Positioning

The 4 m cable allows you to install the panel in the location with the best sunlight while keeping the camera in the position that needs monitoring — this flexibility is often more useful than an extra one or two watts of power.

Secure the cable to prevent it from swinging in the wind and wearing out. Position the connector facing downward and wrap it with waterproof tape, as this is the most common failure point for outdoor solar panels.

  • The panel can be positioned separately from the camera body
  • The cable must be secured
  • Keep the connector facing downward and waterproof it
Rear bracket and mounting structure|Image source: Hong Kong distributor BASCO
Rear bracket and mounting structure|Image source: Hong Kong distributor BASCO

Cleaning and seasonal changes

Solar panels are highly sensitive to surface cleanliness: light dust, bird droppings, and fallen leaves can all significantly reduce output. It is recommended to gently wipe the panel with a damp cloth every two to three months. Do not use a hard brush or solvent-based cleaner.

Sunlight is at a lower angle in winter, so the power generation of the same panel will decrease. If the power level gradually drops in winter and recovers in spring, this is a normal seasonal change and does not necessarily indicate a panel fault.

  • Clean the panel surface every two to three months
  • Lower power generation in winter is normal
  • Check the mounting before a typhoon

Choosing between this and 2S

The Solar Panel 2S features “6W + 5900mAh built-in battery,” while the Solar Panel 3 features “12W with no built-in battery.” The former is suitable for locations with frequent cloudy or rainy weather that require buffering; the latter is suitable for locations with ample sunlight but high power consumption.

If you are unsure, choose 12W first: insufficient power cannot be remedied, while buffering can be handled by the camera’s built-in battery.

  • 2S provides power storage buffering
  • 12W is suitable for high-consumption locations
  • When unsure, prioritize higher power

What’s included

The following is the packaging content for Hong Kong official imports. Actual accessories are subject to the arriving batch; if you have any questions, please confirm with us before placing an order.

  • Specification source: Hong Kong distributor BASCO product information (12W, 6.4V × 1.9A, 310 × 204 × 3.6mm, 4-meter cable). This accessory page has been removed from the Reolink official website.
  • Packaging contents are subject to Reolink’s official shipping configuration. The official product page does not publicly list the package contents item by item, so our store does not speculate on the quantity of accessories. If you need to confirm a specific accessory before ordering (bracket, screw pack, or whether a power supply is included), please contact us first.
  • Hong Kong official import, 2-year original manufacturer warranty, and local support.

Suitable scenarios

Suitable for outdoor battery-powered camera locations with frequent triggering or limited sunlight, where a 6W panel is insufficient to offset power consumption.

  • Driveways with constant traffic
  • Corridors with pedestrians passing by
  • Locations with only a few hours of sunlight
  • High-trigger 4G camera scenarios
  • Warehouses and construction sites

Why choose this model

  • Twice the power at 12W
  • 6.4V × 1.9A peak
  • Direct Type-C connection
  • 4-meter cable for flexible positioning
  • 310 × 204mm panel surface

Complete specifications

ModelACCSP03W / Solar Panel 3
Maximum power12W
Voltage and current6.4V × 1.9A (peak)
InterfaceType-C
Dimensions310 × 204 × 3.6 mm
Cable length4 meters
ColorWhite
Built-in batteryNone
Compatible withReolink full range of outdoor wireless battery-powered cameras

Comparison within the same series

The same series also includes 6W and 6W + battery storage versions; the comparison is shown below, with the 12W version you are viewing highlighted.

ItemSolar Panel 2 WhiteSolar Panel 2SSolar Panel 3 (12W)
Maximum power6W6W12W
ConnectorType-CUSB-CType-C
Voltage/currentNot listed in the official summaryNot listed in the official summary6.4V × 1.9A (peak)
DimensionsNot listed in the official summaryNot listed in the official summary310 × 204 × 3.6 mm
Cable length4 meters4 meters4 meters
Built-in batteryNone5900mAhNone

Frequently asked questions

Is 12W enough for my needs?
It depends on the camera model's battery capacity and the number of daily triggers. If there are 40 or more triggers per day or less than 3 hours of sunlight, 12W is recommended.
Is the connector Type-C?
Yes. Compatibility should be confirmed first for older micro-USB camera models.
What are the dimensions?
310 × 204 × 3.6 mm. Please measure the available space before installation.
What are the voltage and current?
6.4V × 1.9A peak (approximately 12W).
How long is the cable?
4 meters.
Can two panels be connected in parallel?
The official information does not mention parallel connection. Connecting them in parallel yourself is not recommended to avoid voltage mismatch.
What happens on cloudy days?
It will still provide a small amount of charging, but not enough to offset power consumption. The camera will rely on its internal battery; supplemental charging is needed during prolonged cloudy or rainy weather.
Do I need to buy a mounting bracket separately?
Generally included; actual package contents are subject to the official shipment.
Is the color white?
Yes, white (W).
Warranty?
Hong Kong authorized stock, with a 2-year manufacturer's warranty.

Not sure whether 12W is enough?

Tell us the model, the approximate number of activations per day, and the hours of sunlight at the installation location, and we'll help you determine whether 6W or 12W is suitable.

Hong Kong authorized stock | 2-year manufacturer's warranty | Local support

View more
View less
REOLINK Solar Panel 3 12W - REOLINK Solar Panel 3 12W - 圖2

Your favorite products