Choosing LaserPecker really comes down to one question:Do you need to engrave metal, or only wood, leather, paper and acrylic?If you need to engrave metal, the starting price is HK$13,580 (LP4 with dual light sources); if you only engrave non-metal materials, the HK$3,499 L1 Pro is already good to go. The 288% price difference means choosing the wrong one will hurt either way—buying too expensive means wasting money, while buying too cheap means being unable to engrave metal.
Which type of user are you?
🔥 What are the differences between the five models currently on sale? (Verified 2026-10-28)
Prices are automatically generated by the SHOPLINE product API. Verification date: 2026-10-28. Only models currently listed for sale are included. The light source information is based on the manufacturer's stated specifications; for models without this information, please confirm with the distributor.
A data limitation that must be clearly stated: For engraving area (mm), cooling method and laser class, we only have the manufacturer's publicly stated information; we do not have the complete official specification sheet for each model available for verification. If you want to confirm the exact working area before placing an order, we recommend requesting the specification sheet for the specific model directly from the distributor or customer service. Do not rely solely on the table in this article. These are fields we are unwilling to fill in with “approximately” or “about”.
Which models can actually engrave metal?
The dividing line isthe light source type, not the wattage. Diode lasers (blue light 450nm) are almost ineffective on metal—they can engrave stainless steel, but usually require a specialised coating or marking agent, and the results depend on the material, so confirmation with the distributor is required. Genuine metal engraving requires a fibre laser.
- LP5: The official title directly states “dual fibre and diode light source”, making it the model with the clearest metal capability among the five.
- LP4: The official title states “dual light source”, so it also has metal capability, but the specific fibre laser power has not been publicly stated.
- LX1: Listed as 10W 450nm, meaning a blue-light diode laser; its main uses are cutting and engraving wood, leather, paper and acrylic, rather than metalwork.
- LP2 / L1 Pro: The manufacturer does not state the light source type in the product title.
So if you are holding a stainless steel plate and asking “which one can engrave it?”, the only answers are LP5 and LP4. If you are holding acrylic, all five models can handle it; instead, you should choose LX1 based on thearea and cutting requirements.
What should you pay attention to for home use in Hong Kong?
This section is based on the practical experience we have accumulated from actually selling these machines, which differs from unboxing reviews—most overseas reviews assume that you have a garage or a dedicated workshop.
- Ventilation is more important than the machine price. Engraving leather, acrylic and wood produces smoke and particles, while most Hong Kong flats do not have windows that allow cross-ventilation. Westrongly recommend buying them together Desktop air purifier(HK$3,199), with four-stage filtration and a stated 99.97% purification rate; even if you do not want to buy one, at the very least work by a window and add an outward-facing exhaust fan.
- Never engrave PVC, chlorinated plastics, or cheap plastic materials with unknown coatings. Burning chlorinated materials releases hydrogen chloride gas, which is harmful to people and can also corrode the machine. If you cannot identify the material, do not engrave it.
- Rentals / old tenement buildings: pay attention to noise and vibration. The machine itself is not particularly loud, but the fan and vibration during engraving can transfer through the tabletop to the floor below. Placing it on a thick mat and avoiding nighttime operation can prevent many complaints.
- Smoke can stain walls. Engraving beside a wall for long periods will gradually turn white walls yellow. This is the most common “non-machine issue” reported by actual users.
- Children and pets. Even entry-level machines pose laser-related risks. Do not allow children nearby during operation, and wearing protective goggles is recommended (sold separately for some models).
- Insurance and home insurance. Some home insurance policies have restrictions on “using laser equipment at home”, and extra attention is required for commercial use. We cannot answer questions about the details of your policy, please confirm with your insurance company.
Should you buy accessories together?
The air purifier is a practical accessory, while the carrying case is optional—the machine already has a certain level of dust resistance, and in Hong Kong’s humid climate, it is more important to keep it stored in a dry place. If you plan to take the machine to markets or a studio, the carrying case is worth buying.
Frequently asked questions
Which model is least likely to disappoint beginners?
Can it engrave stainless steel?
How long does it take to engrave a cup?
Will it produce a lot of smoke when used at home?
Can it be used in a rental property?
Can discontinued models still be purchased?
Bottom line
For non-metal engraving only: The L1 Pro at HK$3,499 is the entry-level choice; for cylindrical objects, upgrade to the LP2 at HK$4,599; for cutting large areas, choose the LX1 at HK$6,288.For engraving metal: Go straight for the HK$13,580 LP4; only consider the HK$19,998 LP5 once it enters mass production. Price verification date 2026-10-25; all generated automatically by the SHOPLINE Product API.