Reolink Solar Panel 2S 6W Solar Panel | Built-in 5900mAh Battery, IP67
6W + Built-in 5900mAh Battery | USB-C | 4 m Cable | IP67 Waterproof
Product Overview
The Solar Panel 2S is the battery-equipped version in this series: a 6W solar panel combined with a built-in 5900mAh battery. It is more than just a panel—it is a compact solar energy storage system that stores power during the day and continues supplying power at night or on cloudy days.
The specifications on this page are sourced from the **official product summary provided by the distributor**: 6W maximum power, 4 m cable, USB-C, built-in 5900mAh battery, and IP67 waterproofing. The official summary does not list output power, dimensions, or charging protocol details, so we will not speculate on them.
What 5900mAh means: With a standard solar panel, cloudy weather means “zero input,” leaving the device to rely entirely on its own battery. The 2S adds an extra buffer, storing excess power from sunny days for use during two or three consecutive days of rain. This buffer is especially practical for Hong Kong’s rainy summers and typhoon season.

Six Key Highlights
Why Does a Solar Panel Need a Battery?
A standard solar panel’s output depends entirely on current sunlight: power on sunny days, zero power on cloudy days, and zero power at night. The device itself must rely on its built-in battery during periods without sunlight, and its battery level will drop during prolonged cloudy or rainy weather.
The 2S has a built-in 5900mAh battery that stores excess power from sunny days and releases it on cloudy days. This is especially meaningful in Hong Kong’s climate, where several consecutive days of heavy rain in summer and limited sunlight before and after typhoons are common.
- Power remains available on cloudy days and at night
- Suitable for rainy weather and typhoon season
- Store power in advance on sunny days

IP67 and Outdoor Weather Resistance
The official IP67 rating means complete dust protection and resistance to short-term immersion in water. This is more reassuring than products labeled merely “suitable for outdoor use”—solar panels are exposed to rain and sunlight over long periods, while seams and connectors are the main points of failure.
During installation, we still recommend positioning the connector downward and adding waterproof tape. Avoid allowing water to accumulate on the panel or fallen leaves to cover it for extended periods.
- IP67 Dustproof and Water-Resistant (Short-Term Immersion)
- Position the connector downward and waterproof it
- Regularly clear away fallen leaves and standing water
The Rationale Behind the 6W Panel + 5900mAh Battery Combination
A 6W panel provides standard-level power for the daily consumption of typical wireless battery-powered devices, while the 5900mAh battery serves as a buffer. Together, they mean “rely on the panel for everyday use and on stored power during extreme weather.”
If your installation location receives very little sunlight—for example, only two or three hours in the morning—6W alone may not be enough. In this case, the 2S’s energy-storage buffer can significantly extend operating time, but we still recommend improving the panel’s orientation as much as possible.
- Rely on the panel for everyday use and stored power during extreme weather
- 2S is better suited to locations with limited sunlight
- The panel’s orientation should still be improved
USB-C and 4 m Cable
The USB-C connector plugs in directly without an adapter. The 4 m cable allows the panel to be positioned away from the device, such as on an unobstructed eave or railing. For devices installed deep inside a corridor or under tree shade, this distance can often determine whether the installation succeeds.
Secure the cable when routing it and avoid letting it swing in the wind over long periods. Position the connector downward and wrap it with waterproof tape.
- USB-C direct plug-in, no adapter required
- 4 m cable for flexible placement
- Secure the cable to prevent wear

Differences from Solar Panel 2 White
Both panels have a rated power of 6W and a cable length of 4 m. The main difference is that the 2S has a built-in 5900mAh battery and is rated IP67, but it is larger and heavier and costs more. If the installation location receives sufficient sunlight and the camera's built-in battery is large enough, the 2 White is sufficient. If there are frequent rainy or cloudy days and limited sunlight, the 2S offers better backup power.
Installation Recommendations
Face the panel due south (in Hong Kong), avoiding tree shade, air-conditioner drip points, and obstructions directly above. A tilt angle of approximately 20–30 degrees helps with drainage and sunlight exposure. If mounting on a metal awning, use screws with waterproof washers to prevent rust stains from runoff.
After the initial installation, we recommend monitoring the battery level changes in the app for one to two weeks to confirm a net daily increase rather than a gradual decline — this is the only practical way to determine whether the placement is effective.
- Face south, tilted at 20–30 degrees
- Avoid obstructions and drip points
- Monitor the battery trend for one to two weeks

What's in the Box
The following is the packaging content for Hong Kong official stock. Actual accessories are subject to the shipment batch; if you have any questions, please contact us for confirmation before placing your order.
- The specifications on this page are sourced from the official product summary provided by the distributor (the accessory page on the Reolink official website has been removed, so an independent specification sheet is unavailable). The official summary does not list details such as output power, dimensions, or charging protocols.
- The package contents are subject to Reolink's official shipping configuration. The official product page does not publicly list the in-box contents item by item, so our store does not speculate on the quantity of accessories. If you need to confirm whether a specific accessory (bracket, screw kit, or power adapter) is included, please contact us before placing your order.
- Hong Kong official stock, 2-year manufacturer's warranty, and local support.
Suitable Scenarios
Suitable for installation locations with shorter sunlight hours or frequent rain and typhoons, where solar energy storage provides a power buffer.
- Hong Kong summers with consecutive rainy days
- Camera locations with only a few hours of sunlight
- Areas under tree shade or along covered walkways
- Long-term monitoring of warehouses and construction sites
- Users who do not want to frequently remove the camera for charging
Why Choose This Model
- 6W panel + 5900mAh battery
- IP67 dust and water resistance
- USB-C direct plug-in
- 4 m cable for flexible placement
- Suitable for rainy climates
Full Specifications
| Model | Solar Panel 2S |
| Maximum Power | 6W |
| Built-in Battery | 5900mAh |
| Port | USB-C |
| Cable Length | 4 m |
| Water Resistance | IP67 |
| Output Power | Not specified in the official information |
| Warranty | 2-year manufacturer's warranty |
Same-Series Comparison
We also carry the Solar Panel 2 White without a built-in battery; the table below contains the official summary data, with the 2S you are viewing highlighted by a background color.
| Item | Solar Panel 2 White (SP2-W) | Solar Panel 2S |
| Maximum Power | 6W | 6W |
| Interface | Type-C | USB-C |
| Cable Length | 4 m | 4 m |
| Built-in Battery | No | 5900mAh |
| Water Resistance | Not specified in the official summary | IP67 |
| Color | White | Not specified in the official summary |
Frequently Asked Questions
Want to know whether the 2S is worth paying extra for over the 2 White?
Tell us about the sunlight conditions at the installation location and your device model, and we will help you determine whether battery buffering is needed.
Hong Kong-authorized stock|2-year manufacturer's warranty|Local support