Reolink Battery Pack 12800mAh／92Wh External Power Pack｜IP67, Supports Low-Temperature Charging

12800mAh／92Wh｜USB-C｜IP67 Waterproof｜Ultra-Low-Temperature Charging｜Compatible with Reolink Solar Panels

Product Overview

The Reolink Battery Pack（RLA-BP1）is a 12800mAh／92Wh external battery pack that powers outdoor cameras via USB-C. Unlike the small built-in batteries in the cameras, 92Wh is in the same battery-capacity class as larger cameras such as the TrackMix LTE Plus 2, making it suitable for locations that require extended off-grid operation.

The specifications on this page are based on the **official product summary provided by the distributor**: 12800mAh／92Wh, a Type-C port, support for ultra-low-temperature charging, IP67 waterproofing, and compatibility with Reolink Type-C solar panels. The official summary does not list the output power or a complete list of compatible models, so we do not make assumptions on your behalf.

Its most practical use is to “extend off-grid runtime”: for example, indoor camera locations without sunlight, outdoor locations with insufficient sunlight in winter, or short-term event venues. IP67 means it can be placed outdoors, but the connector should still face downward and be protected from water.

Battery Pack Exterior (Official Image)

Six Key Highlights

What Does 92Wh Mean?

92Wh is roughly equivalent to the battery capacity of a 13-inch notebook computer. For a camera, this represents considerable off-grid runtime—the actual duration depends on the camera model’s power consumption and trigger frequency, and the official summary does not provide a fixed figure.

Compared with the built-in batteries of cameras in the same series: Go Plus has 28.08Wh, Go Ultra has 28Wh, and Go PT Ultra has 21.6Wh. This 92Wh battery is more than three times larger, putting it in the “install it and leave it running for a long time” category.

• 12800mAh／92Wh
• Approximately three times the capacity of the Go Plus built-in battery
• Actual runtime varies by camera model and trigger frequency

IP67 and Ultra-Low-Temperature Charging

The official IP67 rating means it is completely dustproof and can withstand brief immersion in water. This is essential for outdoor use—the battery pack is usually mounted beneath the camera body or on a pole, where it is directly exposed to rain.

Another official specification is “ultra-low-temperature charging.” Charging ordinary lithium batteries below 0°C can cause damage, while the low-temperature charging design allows the battery to be recharged in cold environments. Hong Kong winters are not particularly severe, but this feature has practical value if you use it in a cold-storage warehouse or at a high-altitude location.

• IP67 Dustproof and Protected Against Brief Immersion
• Supports Ultra-Low-Temperature Charging
• The Connector Should Still Face Down and Be Protected from Water

USB-C and Solar Panel Compatibility

It uses a USB-C port and can work with Reolink Type-C solar panels, such as the Solar Panel 2 series, for continuous recharging. This combination turns it from a “one-time-use large-capacity battery” into a “continuous power supply system.”

Practical advice: If the installation location receives sunlight, a battery pack plus solar panel is the most reliable off-grid solution. If there is no sunlight at all, such as indoors or beneath a covered walkway, you will need to plan to remove it periodically for charging.

• USB-C Port
• Compatible with Type-C Solar Panels
• Locations Without Sunlight Require Periodic Removal for Charging

Compatibility Needs to Be Confirmed for Each Camera

The official summary only states that it is “suitable for outdoor cameras (Type-C)” and does not provide a complete list of compatible models. Reolink models do not all use exactly the same power-supply protocols, and some models have specific requirements for external battery packs.

Please tell us your camera model before placing an order, and we will help verify compatibility. Forcing an incompatible power source to connect most commonly results in the camera being unable to power on or showing that it is charging without actually receiving power.

• Provide Your Camera Model for Verification Before Ordering
• Power-Supply Protocols Vary Between Models
• Incompatibility may prevent the device from powering on or supplying power

Installation and Placement

As it is IP67-rated and has a certain weight, we recommend using a bracket or cable ties to secure it to a pole or wall during installation. Do not leave it suspended by the cable — long-term strain may loosen the connector.

Position the connector facing downward, apply waterproof tape, and avoid areas where water may accumulate. If used with a solar panel, secure the solar panel cable as well to prevent wind abrasion.

• Secure with a bracket or cable ties
• Point the connector downward and add waterproofing
• Do not leave it suspended by the cable

Who Is It Suitable For

Suitable for situations requiring long-term operation in locations without a power source, areas with insufficient sunlight during winter, or off-grid power at short-term event venues.

Not suitable for locations with a stable power source (plugging directly into a power outlet is more cost-effective), or for replacing a camera's built-in battery (choose the replacement battery for the corresponding model instead).

• Suitable for long-term off-grid operation
• This accessory is not needed if a stable power source is available
• Choose the corresponding model when replacing the built-in battery

What's in the Box

The following is the packaging content for Hong Kong authorized goods. Actual accessories are subject to the shipment batch; please contact us for confirmation before placing an order if you have any questions.

• The specifications on this page are sourced from the official product summary provided by the distributor (the manufacturer has not provided a separate specification sheet, nor listed the output power or a complete list of compatible models). Please provide the camera model before placing an order so we can verify compatibility for you.
• Packaging contents are subject to the official Reolink shipping configuration. The official product page does not disclose the in-box contents item by item, and our store does not speculate on the quantity of accessories. If you need to confirm whether a specific accessory (bracket, screw kit, or power adapter) is included, please contact us before placing an order.
• Hong Kong authorized goods, 2-year manufacturer's warranty, and local support.

Suitable Applications

Suitable for outdoor installation locations that require long-term operation without a power source or have insufficient sunlight during winter.

• Outdoor camera locations without a power source
• Locations with insufficient sunlight during winter
• Short-term event venues and construction sites
• Freezer warehouses or low-temperature environments
• 4G cameras requiring extended off-grid operation

Why Choose This Model

• 12800mAh / 92Wh high capacity
• IP67 dustproof and waterproof
• Supports ultra-low-temperature charging
• USB-C compatible with solar panels
• Suitable for long-term off-grid operation

Full Specifications

Comparison Within the Same Series

We also carry replacement batteries specifically for Go Plus／Go Ultra; the table below provides an official summary, with the power pack you are viewing highlighted.

Frequently Asked Questions

Want to know whether this power pack works with your device?

Tell us your model and we will check compatibility and estimate the approximate runtime based on your trigger frequency.

Hong Kong Genuine Product｜2-Year Original Manufacturer's Warranty｜Local Support