EZVIZ · DIGIBAL ONLINE
EZVIZ BM1
Pocket Battery-Powered Baby Monitor Camera
One of the smallest battery-powered baby cameras on the market: 1080P, crying detection, out-of-crib alerts, and a 2000mAh rechargeable battery with no wiring required.

Product Overview
The EZVIZ BM1 is a battery-powered camera designed for baby care: 1/2.8-inch 2MP CMOS, 1920×1080 at 15fps, and a 4mm @ F1.6 lens with a 100° diagonal field of view. Its compact body can be clipped onto a crib or placed against a wall.
It detects baby-care-specific events rather than general motion: crying detection, out-of-crib (Baby Leaving) alerts, baby activity detection, and automatic soothing music playback. Night vision uses infrared with no visible red glow, so it will not light up with red dots and startle your baby at night.
The built-in 2000mAh rechargeable battery eliminates the need for wiring. It supports up to 256GB of local microSD storage, and EZVIZ CloudPlay can be purchased separately for cloud backup.
Three Things to Clarify First:
- The memory card limit is 256GB: less than the 512GB supported by pan-and-tilt models, so pay attention to the overwrite cycle for long-term storage.
- The battery-powered camera does not support 24-hour continuous recording: it is primarily event-triggered, and whether it is plugged in affects battery life and recording modes.
- The night vision range is approximately 5 meters: sufficient for close-range crib monitoring, but not enough to cover an entire room.
Six Key Features
1080P 2MP
1920×1080 at 15fps, sufficient for viewing your baby's position at close range.
Crying Detection
Sends a push notification when crying is detected, so you do not need to constantly watch the screen.
Out-of-Crib Alerts
Notifies you when your baby leaves the designated area, especially useful at night.
Automatic Music Playback
Automatically plays soothing music when it detects that your baby needs comforting.
2000mAh Battery
No wiring required; move it to any location.
256GB Local Storage
microSD loop recording with no monthly fees.
Crying Detection and Out-of-Crib Alerts
The BM1's AI is tuned for baby care: it does more than detect whether something is moving. It distinguishes crying, whether the baby has left the crib area, and activity status. These three types of events are pushed separately, allowing parents to enable only the features they need.

Key Points
- Crying Detection
- Out-of-Crib (Baby Leaving) Alert
- Baby Activity (Smart Human) Detection
- Smart Alarm Support
Close-Range Imaging with 1080P and a 4mm Lens
1/2.8-inch 2MP CMOS, 4mm @ F1.6, 100° diagonal, 85° horizontal, and 46° vertical field of view. This viewing angle is ideal for a crib: close enough for a clear view without making the entire room appear overly wide.

Key Points
- 1920 × 1080, 15fps
- 4mm @ F1.6
- 100° diagonal/85° horizontal/46° vertical
- H.265/H.264 Encoding
Night Vision with No Visible Red Glow
Night vision up to approximately 5 meters uses invisible infrared with no visible red glow, so no red dots will light up in the middle of the night. Combined with automatic IR-cut switching and 3D DNR noise reduction, it delivers cleaner images in low-light conditions.

Key Features
- Night vision up to approximately 5 meters
- Invisible red-light design
- IR-cut filter with auto-switching
- 3D DNR noise reduction
2000mAh Battery and Wire-Free Installation
Built-in 2000mAh rechargeable battery, so there is no need to run power cables beside the crib — this is more practical for nursery use than any image-quality specification, because every extra cable beside the crib adds another potential risk.

Key Features
- 2000mAh rechargeable battery
- No cables required; can be repositioned anytime
- AP pairing mode (AP pairing)
- Wi-Fi 802.11b/g/n, 2.4GHz
Two-Way Talk and Auto-play Music
Supports two-way talk for direct conversations and reassurance; Auto-play Music automatically plays soothing music when needed, so there is no need to turn on a separate player.
Key Features
- Two-way Talk
- Auto-play Music
- Adaptive audio bitrate
- Maximum bitrate 1Mbps
Local Storage and Smart Home Integration
Supports microSD cards up to 256GB, with loop recording and no monthly subscription required; CloudPlay can be purchased separately for off-site backups. It also supports Google Assistant and Amazon Alexa, allowing you to check in using voice commands.
Key Features
- microSD up to 256GB
- Supports EZVIZ CloudPlay (purchased separately)
- Google Assistant/Amazon Alexa
- EZVIZ cloud proprietary protocol
Two Details That Are Easy to Misunderstand
1. A Battery-Powered Camera Is Not a 24-Hour Continuous Recording Camera
The BM1 is primarily designed for event-triggered recording. If you need uninterrupted recording, such as monitoring a bedridden family member over an extended period, choose a plug-in model instead; the value of a battery-powered camera lies in its wire-free setup and flexible repositioning.
2. Crying Detection Is Not Cry Interpretation
The BM1 detects when there is crying and notifies you, but it does not determine the reason for the crying. Its practical purpose is to let you know that your baby has woken up when you are in another room or at work, not to replace a caregiver's judgment.
Three Practical Usage Scenarios
Beside the Crib
Clip it onto the crib rail or place it against a wall. The 100° diagonal view is enough to cover the entire crib surface, while crying detection and out-of-bed alerts are sent separately, so there is no need to turn on the light for a check in the middle of the night.
Living Room Play Area
Move it to the play area during the day to monitor your child's activity space; battery power means there is no need to run new cables.
Travel or Visiting Family
Put it in your bag when traveling. Use AP mode for quick pairing in a hotel room or at a relative's home, then connect it to the local Wi-Fi to view remotely.
What's in the Box
- EZVIZ BM1 main unit ×1
- Power adapter ×1
- Installation accessories ×1 set
- Documentation ×1
The above reflects the contents listed by the manufacturer; the complete package contents are subject to the actual product.
Why Choose EZVIZ BM1
Compared with standard indoor pan-and-tilt cameras: different detection logic
C6C/C7 detect people and motion; BM1 detects crying, leaving the bed, and baby activity. The latter is exactly what nursery scenarios need.
Compared with plug-in models: no wiring is the key benefit
One more cable beside the baby’s crib means one more risk. Battery power lets you place it anywhere, including corners without a power outlet.
Compared with cloud-based solutions: one-time hardware purchase with no monthly fees
Recordings are saved to the device’s microSD card, making long-term costs predictable; only add CloudPlay if off-site backup is needed.
Complete specifications and comparison with the same series
The following specifications are transcribed item by item from EZVIZ’s official specification table (BM1 1080P); values and units have not been converted.
| Model | CS-BM1(1080P) |
| Image sensor | 1/2.8-inch 2-Megapixel Progressive Scan CMOS |
| Minimum illumination | 0.1 lux |
| Lens | 4mm @ F1.6 |
| Field of view | 100° diagonal/85° horizontal/46° vertical |
| Day/night switching | IR-cut filter with auto-switching |
| Noise reduction | 3D DNR |
| Night vision | Up to approximately 5 meters/16 ft |
| Maximum resolution | 1920 × 1080 |
| Frame rate | 15fps(adaptive during network transmission) |
| Video encoding | H.265/H.264 |
| Maximum bit rate | 1 Mbps |
| Detection | Crying, leaving the bed, baby activity(Smart Human) |
| Two-way talk | Supported |
| Automatic music | Supported |
| Wi-Fi standard | IEEE 802.11b/g/n |
| Frequency band | 2.4GHz ~ 2.4835GHz |
| Wi-Fi pairing | AP pairing |
| Local storage | microSD up to 256GB |
| Cloud | EZVIZ CloudPlay(subscription required) |
| Battery | 2000mAh rechargeable |
| Operating Temperature | -10°C to 45°C |
Compare Models in the Same Series
The table below only lists models available in our store. You are viewing the EZVIZ BM1.
| Model | Resolution | Power Supply | Baby Monitoring Detection | Storage |
|---|---|---|---|---|
| ▶ BM1 (This Page) | 1080P 1920×1080 | 2000mAh battery | Crying / Off-Bed / Activity | 256GB |
| C6C 8MP | 4K 3840×2160 | Plug-in | Person / Pet / Gesture | 512GB |
| C7 Dual | DUAL 2K+ | Plug-in | Person / Pet | 512GB |
| CB1 B2 | 1080P | Battery | Person | microSD |
Frequently Asked Questions
Q: Can the BM1 record continuously?
A: The BM1 is a battery-powered, event-triggered model and does not support 24-hour continuous recording. If you need uninterrupted recording, please choose a plug-in model.
Q: Will cry detection generate false alarms?
A: It may be affected by environmental sounds, such as the TV or another baby crying. We recommend setting the sensitivity to medium and enabling this notification only when needed.
Q: How long does the battery last?
A: It depends on the number of event triggers and notification frequency. The official specifications do not state a fixed battery life; actual usage depends on the number of events you configure.
Q: Do I need to purchase a memory card? What is the maximum supported capacity?
A: Yes. A microSD card is not included in the package; the maximum supported capacity is 256GB.
Q: Can it be used while traveling?
A: Yes. It supports AP pairing, so you can connect it to the local Wi-Fi network for remote viewing. We recommend bringing the power adapter when traveling.
Q: How is repair arranged for Hong Kong official stock?
A: The product sold by our store is Hong Kong official stock. For non-user-caused faults during the warranty period, please contact cs@digibalonline.com. Our store will arrange inspection and repair service.
Q: How is after-sales service handled when using the product overseas or after leaving Hong Kong?
A: Our store has overseas warehouses in Australia, the UK, Germany, Singapore, Canada, the US, Malaysia, France, and Dubai to provide support. For details, please contact customer service (cs@digibalonline.com). Overseas warehouse arrangements for after-sales service may change.
Q: Does it support smart home integration?
A: It supports Google Assistant and Amazon Alexa.
Choose According to Your Needs
Choose BM1 for baby monitoring; choose C6C 8MP for 4K whole-home viewing.
Warranty
Two-Year Manufacturer's Warranty
The warranty period is based on the legal requirements of the local country.