Frequently Asked Questions
Q: Before buying, how do I know whether it will work with the sockets at home?
A: Check the socket layout: if there are two sockets side by side, a switch directly above them, a raised frame around the socket, or if the socket is close to the wall, a thick plug may press against the surrounding edge and may not fit flush. It may also block the switch. It is best to measure the available space around the socket before buying.
Q: The plug won't fit into the socket. Is the product defective?
A: No. There is nothing wrong with the plug; it is an issue with the socket layout. Any thick plug will get stuck in these positions. Use a power strip with local safety certification to separate the plugs, and it will work.
Q: What should I be aware of when using a power strip?
A: Choose a power strip with overload protection and local safety certification (for example, choose one with SAA/RCM certification in Australia/New Zealand). Plug the adapter directly into the power strip, do not connect one power strip to another, and leave enough space for heat dissipation.
Q: What can I use instead if I don't want to add a power strip?
A: Consider a compact GaN charger. It is much smaller and can fit in narrow sockets. Save the travel adapter for use when traveling; hotel sockets are generally wider, so the adapter is less likely to be obstructed.
Q: Before buying, how do I know it fits my sockets at home?
A: Look at the socket spot: twin sockets side by side, a switch directly above, a raised surround, or a position near a wall edge - a full-size plug body will hit the surround and may not sit flush, and can cover the switch. Measure the space before buying if unsure.
Q: The plug will not go in - is the product faulty?
A: No. The plug itself is fine; it is the socket placement - any full-size plug jams in those spots. A certified power board with space for each plug solves it.
Q: Anything to watch out for with power boards?
A: Choose one with overload protection and local safety certification (e.g. SAA/RCM in Australia/New Zealand); plug the adapter directly into the board, never daisy-chain boards, and leave room for heat dissipation.
Q: I would rather not use a power board - any alternatives?
A: Consider a slim GaN charger - much smaller and fits tight spots; keep the travel adapter for trips, where hotel sockets usually have more room.
Q:Which switch should I use for Japan / the US / Australia / the UK?
A:Slide the switch according to the label: USA = Japan / US (flat pins); AUS = Australia / New Zealand / mainland China (angled pins); UK = UK / Hong Kong / Singapore (three rectangular pins); EU = Europe / Korea (round pins). Slide out only one switch at a time. Slide it out before plugging in and retract it before unplugging.
Q:Is this also a voltage converter?
A:No. A travel adapter only changes the pin shape; it does not change the voltage. A 110V-only appliance (such as some US hair dryers) may burn out if used in a 220V region. Most modern phone, laptop and camera chargers support 100–240V universal input (check the fine print on the charger), so confirm before use.
Q:Can the AC socket and USB ports be used at the same time?
A:Yes. Each output is independently powered, but the combined load must not exceed the total power limit printed on the body. When using the high-wattage USB-C port to charge a laptop, keep other high-power loads plugged in separately. See the model specification table for detailed combinations.
Q:Why are there two fuse slots on the back?
A:One slot holds the fuse in use, while the other is for the SPARE FUSE. If the fuse blows due to overload, open the compartment with a small screwdriver and replace it with the spare fuse. If it blows again, the load is too high—do not use a higher-wattage fuse.
Q:Can I use this every day at home in Hong Kong?
A:It depends on the model. If the back has a UK plug-pin mode, it can be plugged into a Hong Kong socket for temporary use. However, travel adapters are designed for travel, and some models carry a label on the back stating “Not designed for connection to Hong Kong power sockets.” For long-term home use, please use a regular plug or power adapter.
Q:Can I take this on a plane?
A:Yes. The travel adapter itself has no battery, so it can be carried in hand luggage or checked baggage. Note that it is different from a “power bank / portable charger”—those contain batteries and may only be carried in hand luggage, not checked baggage.
Q: Which slider for Japan / the US / Australia / the UK?
A: Slide per the label: USA = Japan/US (flat pins); AUS = Australia/NZ/mainland China (angled pins); UK = UK/Hong Kong/Singapore (three rectangular pins); EU = Europe/Korea (round pins). Slide one at a time; slide out before unplugging.
Q: Is this also a voltage converter?
A: No. A travel adapter only changes the pin shape, not the voltage - a 110V-only appliance (like some US hair dryers) will burn out on 220V. Modern phone/laptop/camera chargers are mostly 100-240V universal (check the fine print on the charger) - confirm before use.
Q: Can the AC socket and USB ports be used at the same time?
A: Yes - each output is independent, but the total must stay under the rated maximum printed on the body. When charging a laptop on the high-wattage USB-C port, keep other heavy loads off. See the model spec table for combinations.
Q: Why are there two fuse slots on the back?
A: One is the active fuse, the other is the SPARE FUSE - if it blows from overload, swap in the spare with a small screwdriver. If the new one blows too, the load is over the limit - do not fit a higher rating.
Q: Can I use it daily at home in Hong Kong?
A: Depends on the model: with a UK pin mode it fits Hong Kong sockets for occasional use; but travel adapters are designed for trips, and some models carry a sticker saying they are not designed for Hong Kong mains sockets - for everyday home use, use a regular charger.
Q: Can I take it on a plane?
A: Yes. A travel adapter has no battery, so it is fine in both cabin and checked luggage. Note the difference from power banks - those contain batteries and must go in cabin baggage only.
What is the official specification “AC Input”?
The official product page lists: 100V-250V, 50/60Hz.
What is the official specification “Rating”?
The official product page lists: 100-250V~ 10A max., 2500W max.
What is the official specification “Total DC Output”?
The official product page lists: 85W max.
What is the official specification “Built-in USB-C cable length”?
The official product page lists: 75cm.
What is the official specification “Operating Temperature”?
The official product page lists: 0 – 35°C.
Is this model Hong Kong authorized stock?
Yes. This listing is for Hong Kong authorized stock. The warranty is subject to the terms on this product page and the distributor’s warranty terms.
Where does the specification information come from?
Each specification is taken directly from the original Verbatim Hong Kong official product page (verbatim.com.hk), without estimates or conversions. Items not listed on the official page will not be added here.
What is included in the package?
The package contents listed on the official page are subject to the received batch. If you need to confirm any particular accessory, please contact us before placing your order.