FAQs
Q: Before buying, how do I know whether it will work with the sockets at home?
A: Check the socket layout: if there are two sockets side by side, a switch directly above, a raised surround around the socket, or the socket is close to the edge of a wall, the thick plug body may hit the surround and may not sit flush. It may also cover the switch. It is best to measure the available socket space before buying.
Q: The plug will not go in - is the product faulty?
A: No. There is nothing wrong with the plug; it is an issue with the socket layout. Any thick plug will get blocked in these positions. Use a power strip with the relevant local safety certification to separate the plugs and it will work.
Q: What should I be aware of when using a power strip?
A: Choose a power strip with overload protection and the relevant local safety certification (for example, choose SAA / RCM certification in Australia / New Zealand). Plug the adapter directly into the power strip, do not connect one power strip to another, and leave enough space for heat dissipation.
Q: I do not want to use a power strip. Is there an alternative?
A: Consider a compact GaN charger. It is much smaller and can fit in sockets with limited space. Save the travel adapter for use when travelling; hotel sockets are generally more spacious, so there is less chance of it being blocked.
Q: Before buying, how do I know it fits my sockets at home?
A: Look at the socket spot: twin sockets side by side, a switch directly above, a raised surround, or a position near a wall edge - a full-size plug body will hit the surround and may not sit flush, and can cover the switch. Measure the space before buying if unsure.
Q: The plug will not go in - is the product faulty?
A: No. The plug itself is fine; it is the socket placement - any full-size plug jams in those spots. A certified power board with space for each plug solves it.
Q: Anything to watch out for with power boards?
A: Choose one with overload protection and local safety certification (e.g. SAA/RCM in Australia/New Zealand); plug the adapter directly into the board, never daisy-chain boards, and leave room for heat dissipation.
Q: I would rather not use a power board - any alternatives?
A: Consider a slim GaN charger - much smaller and fits tight spots; keep the travel adapter for trips, where hotel sockets usually have more room.
Q: Which slider should I use for Japan / the US / Australia / the UK?
A: Slide according to the label: USA = Japan / the US (flat pins); AUS = Australia / New Zealand / mainland China (angled pins); UK = the UK / Hong Kong / Singapore (three rectangular pins); EU = Europe / Korea (round pins). Slide out one at a time; slide out before plugging in, and retract before unplugging.
Q: Is this also a voltage converter?
A: No. A travel adapter only changes the pin shape, not the voltage - a 110V-only appliance (such as some US hair dryers) will burn out when taken to a 220V region. Modern phone / computer / camera chargers are mostly universal 100–240V (check the fine print on the device); confirm before use.
Q: Can the AC socket and USB ports be used at the same time?
A: Yes. Each port supplies power independently, but the combined total must not exceed the maximum rated power marked on the unit. When charging a laptop through the high-wattage USB-C port, it is recommended to plug other high-power loads into a separate outlet. See the model specification table for detailed combinations.
Q: Why are there two fuse slots on the back?
A: One is the active fuse, and the other is the SPARE FUSE. If the fuse blows due to overload, open it with a small screwdriver and replace it with the spare. If it blows again, the load exceeds the limit - do not use a higher-rated fuse.
Q: Can I use it daily at home in Hong Kong?
A: It depends on the model: a model with a UK pin mode can be plugged into Hong Kong sockets for temporary use. However, travel adapters are designed for use while travelling, and some models have a sticker on the back stating that they are not designed to connect to Hong Kong mains sockets. For long-term home use, use a standard wall charger.
Q: Can I take it on a plane?
A: Yes. A travel adapter has no battery, so it is allowed in both carry-on and checked luggage. Note that this is different from a power bank / portable charger - those contain batteries and may only be carried in hand luggage, not checked luggage.
Q: Which slider for Japan / the US / Australia / the UK?
A: Slide per the label: USA = Japan/US (flat pins); AUS = Australia/NZ/mainland China (angled pins); UK = UK/Hong Kong/Singapore (three rectangular pins); EU = Europe/Korea (round pins). Slide one at a time; slide out before unplugging.
Q: Is this also a voltage converter?
A: No. A travel adapter only changes the pin shape, not the voltage - a 110V-only appliance (like some US hair dryers) will burn out on 220V. Modern phone/laptop/camera chargers are mostly 100-240V universal (check the fine print on the charger) - confirm before use.
Q: Can the AC socket and USB ports be used at the same time?
A: Yes - each output is independent, but the total must stay under the rated maximum printed on the body. When charging a laptop on the high-wattage USB-C port, keep other heavy loads off. See the model spec table for combinations.
Q: Why are there two fuse slots on the back?
A: One is the active fuse, the other is the SPARE FUSE - if it blows from overload, swap in the spare with a small screwdriver. If the new one blows too, the load is over the limit - do not fit a higher rating.
Q: Can I use it daily at home in Hong Kong?
A: Depends on the model: with a UK pin mode it fits Hong Kong sockets for occasional use; but travel adapters are designed for trips, and some models carry a sticker saying they are not designed for Hong Kong mains sockets - for everyday home use, use a regular charger.
Q: Can I take it on a plane?
A: Yes. A travel adapter has no battery, so it is fine in both cabin and checked luggage. Note the difference from power banks - those contain batteries and must go in cabin baggage only.
What does the official specification "AC Input" mean?
The official product page lists: 100V-250V, 50/60Hz, 2.3A.
What does the official specification "Rating" mean?
The official product page lists: 100-250V~ 10A max., 2500W max.
What does the official specification "USB-C1 PD3.0 & QC 3.0 (PPS Supported)" mean?
The official product page lists: 5-11V⎓3.3A, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓5A (100W max.).
What does the official specification "USB-C2/C3" mean?
The official product page lists: 5V⎓3A (15W max. each).
What does the official specification "USB-A1/A2" mean?
The official product page lists: 5V⎓2.4A (12W max. each).
Is this model officially distributed in Hong Kong?
Yes. This listing is Hong Kong official stock, and the warranty terms are subject to this product page and the distributor's terms.
Where does the specification information come from?
Each item is taken from the original text of Verbatim Hong Kong's official product page (verbatim.com.hk), without speculation or conversion. Items not listed on the official page will not be added here.
What is included in the package?
The package contents listed on the official page are subject to the incoming batch. If you need to confirm any specific accessories, please contact us before placing your order.