Reolink Argus 3 Pro Wireless Battery Camera [Hong Kong Official Stock]

2880 × 1620 (5 megapixels) @15fps｜6000mAh rechargeable battery｜Reolink Solar Panel (3W)｜Hong Kong Official Stock with 2-Year Warranty

Product Overview

The Argus 3 Pro is a Reolink battery-powered wireless camera with an official resolution of 2880 × 1620 (5 megapixels) @15fps, an f=2.8mm, F=1.6 lens, and a 6000mAh rechargeable battery.

All specifications on this page are taken directly from the Specifications table on Reolink's official product page and transcribed item by item, without assumptions or conversions; items not listed officially have not been added.

The battery-powered camera does not require wiring, but the installation location must have stable WiFi coverage, and the battery level should be checked regularly. If you are unsure whether the signal is strong enough, send us a photo of the installation location before placing your order.

Argus 3 Pro body design (official image)

Six Key Features

Battery Power and Solar Charging

The Argus 3 Pro uses a 6000mAh rechargeable battery; it can be paired with the Reolink Solar Panel (3W).

The core value of a battery-powered camera is that it requires no wiring at all: it can be installed on exterior walls, rooftops, fences, and in rented properties where drilling or running power cables is not possible. The trade-off is that you need to monitor the battery level, and recording is generally triggered by detection rather than continuous 24-hour recording.

The official specifications note that battery life is affected by settings, usage, and temperature. In practice, it can generally last through summer, while winter requires more attention; lowering detection sensitivity and notification frequency can significantly extend battery life.

Image Quality and Lens

Official resolution: 2880 × 1620 (5 megapixels) @15fps, with an f=2.8mm, F=1.6 lens.

The field of view is Horizontal:105°,Vertical: 55°. The wide-angle perspective is suitable for wall-mounted installation to cover an entrance and adjacent passageway at once; the narrower angle is better for focusing on a single target, such as a gate or parking space.

Before installation, measure the distance from the installation point to the target, then decide whether to mount the camera higher or lower. The coverage can differ considerably when the same camera is mounted at 2.5 metres versus 3.5 metres.

Night Vision and Full-Color Mode

Official infrared night vision: 10m (33ft) (LED: 6pcs/0.8W/850nm).

Full-color night vision: With spotlights: 2pcs/2W/6500K/230 Lumen.

Infrared footage is in black and white, making it discreet and less likely to disturb passers-by; full-color mode uses spotlights for illumination and preserves the colors of clothing and vehicles. During installation, avoid pointing the lens directly at a white wall or metal awning, as reflected light from the spotlight may cause the center of the image to become overexposed.

PIR Detection and Mobile Notifications

Smart detection: PIR detection; motion detection; person/vehicle/animal detection.

The battery-powered camera uses PIR (passive infrared) sensing to detect body heat and activate recording, so recording only when motion is detected is key to saving power. Conventional motion detection can be triggered continuously by tree shadows and changes in lighting, quickly draining the battery.

Notifications can be enabled or disabled individually. To extend battery life, lower the notification frequency and set the sensitivity to medium; to capture more footage, increase the sensitivity, but be prepared for more frequent charging.

App, Two-Way Talk and Storage

Audio: Built-in microphone and speaker／Wireless。

In the Reolink App, press and hold the talk button to speak to people at the camera location. It is suitable for receiving parcels at the door, reminding people in the garden, or notifying visitors about a parking space.

Storage: Supports Max. 512GB microSD card／Reset Button／YES，providing local storage without a monthly fee. A Reolink NVR or Hub can also be added for centralized backups.

Installation Location and WiFi Signal

The battery-powered camera has no network cable, so the signal relies entirely on WiFi. Before installation, use the Reolink App to check the signal strength on site: do not install it if the signal is below two bars, otherwise you may encounter a situation where it records but cannot transmit the footage, resulting in intermittent playback when reviewing it later.

An installation height of 2.5 to 3 metres is recommended: mounting it too low makes it easier to tamper with, while mounting it too high creates a downward-looking angle on people's faces. Tilting the lens downward by 15 to 20 degrees can provide a good balance between capturing faces and the ground.

A common issue in Hong Kong is that exterior walls are made of reinforced concrete, which causes significant signal attenuation. If the signal is insufficient, try directing the router antenna toward the installation location, or add a Mesh node between the two. This usually makes a more noticeable difference than switching to a more expensive camera.

Unboxing Checklist

The following are the contents of the Hong Kong official-stock package. Actual accessories may vary by shipment batch; please contact us for confirmation before placing an order if you have any questions.

• Argus 3 Pro camera x1
• Battery (built-in) x1
• Mounting screw kit and positioning sticker x1
• USB-C charging cable x1
• Quick Start Guide x1
• Hong Kong official-stock warranty certificate x1
• If you need to purchase the solar panel separately, please contact us for compatible options.

Suitable Scenarios

The scenarios below are situations that this model can realistically handle. If your installation environment differs from those listed below (for example, there is no WiFi signal at all or the installation location is shaded all day), we recommend contacting us for confirmation first.

• Village house exterior walls: no wiring required, covering the main entrance and driveway entrance
• Rooftops and fences: ample sunlight allows the solar panel to continuously replenish power
• Rental units: no drilling or wiring required; take it with you when you move
• Shop back doors and alleyways: motion-triggered recording saves power
• Warehouse perimeters: view remotely via the app

Why Choose This Model

• No wiring required at all, so the installation location is not limited by access to power
• Works with the Reolink Solar Panel (3W) to continuously replenish power in sunlight
• Local storage (Supports Max. 512GB microSD card／Reset Button／YES), so you can review recordings without a monthly fee
• Records only when PIR detection is triggered, saving power while reducing unnecessary footage
• 2-year Hong Kong official-stock manufacturer warranty with local support

Full Specifications

Compare Models in the Same Series

The table below lists only four factors that affect your purchase decision, making it easier to choose a model based on the distance and environment at your site. For differences in other specifications within the same series, please contact us.

Frequently Asked Questions

Would you like to confirm whether the installation location has Wi-Fi coverage?

Send us a photo or floor plan of the installation location, and we will recommend the installation height, antenna direction, and whether an additional solar panel is required based on the site conditions.

Hong Kong Official Stock｜2-Year Manufacturer's Warranty｜Local Support